PRP Tubes with ACD Solution A — 2026 Buyer's Guide for Aesthetic & Regenerative Medicine
Share
Platelet-Rich Plasma (PRP) therapy has become a foundation of aesthetic medicine, dermatology, orthopedic injections, and hair restoration. The critical variable that determines PRP quality is the collection tube — specifically the anticoagulant and separator technology. This 2026 buyer's guide covers PRP tubes with ACD Solution A, why anticoagulant choice matters, comparison to Selphyl/Eclipse commercial systems, and how SciMed's 10 mL ACD-A tubes at $199 per pack of 10 compare on cost and quality.
PRP Tubes — ACD Solution A, 10 mL, Pack of 10
$199.99/pack · $19.99 per tube · Sterile · Made in USA
Order pack →Quick answer: what practices need PRP tubes?
- Dermatologists — PRP microneedling, PRP facial ("vampire facial"), acne scar treatment
- Aesthetic medicine / med spas — skin rejuvenation, hair restoration
- Hair restoration clinics — PRP scalp injections for androgenic alopecia
- Orthopedic surgeons + sports medicine — knee OA, tennis elbow, plantar fasciitis, tendon injuries
- Wound care specialists — chronic wounds, diabetic ulcers
- Regenerative medicine practices — growing PRP applications
Why ACD Solution A vs sodium citrate
ACD-A (Acid Citrate Dextrose Solution A) is the standard PRP anticoagulant. Compared to sodium citrate:
- Better platelet preservation — dextrose maintains platelet metabolism and viability
- Superior separation — creates cleaner buffy coat layer after centrifugation
- Higher yield — recovers more viable platelets per mL of blood drawn
- Industry standard — published PRP protocols specify ACD-A
SciMed PRP tube specifications
- Volume: 10 mL draw
- Anticoagulant: 1.5 mL ACD Solution A (final ratio 1:6.7)
- Separator gel: Yes (density-based platelet separation)
- Material: Medical-grade PET (shatter-resistant)
- Sterility: Sterile, sealed under vacuum
- Shelf life: 24 months from manufacture
- Standard centrifuge compatibility: works with any 3200-3500 RPM clinical centrifuge
- Country of origin: United States
Standard PRP protocol using SciMed tubes
- Draw 10 mL peripheral blood into SciMed ACD-A PRP tube
- Invert gently 5-8 times to mix (do NOT shake)
- Centrifuge at 3200 RPM for 10 minutes (single-spin protocol)
- Three layers form: RBC bottom, buffy coat middle, platelet-poor plasma top
- Aspirate 3-5 mL PRP from just above the buffy coat
- Activate with calcium chloride if protocol calls for it
- Inject or apply within 4 hours of collection
Cost comparison to commercial PRP systems
| System | Cost per procedure |
|---|---|
| SciMed ACD-A PRP tubes ($19.99/tube) | $19.99-$39.98 |
| Selphyl PRPFM kit | $150-$250/kit |
| Eclipse PRP kit | $60-$120/kit |
| RegenLab kit | $100-$200/kit |
Practice margin math: PRP procedures typically charge $500-$1,500 per session. Using SciMed tubes at $20/procedure vs $150 commercial kit = $130 additional margin per patient. At 20 PRP procedures/month = $2,600 additional practice revenue.
Frequently asked questions
Are SciMed PRP tubes FDA-cleared?
Yes. FDA Class II medical device for blood collection.
What centrifuge do I need?
Any clinical centrifuge capable of 3200-3500 RPM with swing-bucket rotor for 10 mL tubes. SciMed's hand-operated centrifuge won't reach these speeds — you need a powered clinical centrifuge for PRP.
How long can I store PRP before use?
PRP should be used within 4 hours of preparation. Do NOT refrigerate prepared PRP for later use.
Do you offer NET-30 for aesthetic practices?
Yes. NET-30 available for verified aesthetic medicine, dermatology, and hair restoration practices.
What are the anticoagulant ratios?
1.5 mL ACD-A per 8.5 mL whole blood (final ratio 1:6.7 in a 10 mL tube).
Can I use these tubes for platelet-poor plasma (PPP)?
Yes. After centrifugation, aspirate the upper plasma layer for PPP applications.