|
Boerner (Brass) Seed Divider Sample Seeds Grain Divider R&D Quality Control Boerner (Brass) Seed Divider Sample Seeds Grain Divider R&D Quality Control Material flowing components are made by a special process to give the unit a smooth finish made without welding or joints. It is used to reduce the size of a grain/seed sample into two halves, each exactly representative of the original sample. HOW IT WORKS Size : 12 x 12 x 33 inch approx To operate this device, a sample of grain is poured into the hopper and then released down in to the cone which is directly under the center of the opening. Around the base of the cone are 32 openings or pockets. The grain falling down the sides of the cone is cut into 32 separate streams, rejoining into two streams, which empties into the two p The divider is calibrated to provide accuracy of 1 % between pans on a 1000 gm sample. The body and inner parts are made of copper and brass, eliminating the possibility of rust. The legs and supports are made from steel. THANK YOU!! |